PERTANIKA JOURNAL OF TROPICAL AGRICULTURAL SCIENCE

 

e-ISSN 2231-8542
ISSN 1511-3701

Home / Regular Issue / JTAS Vol. 31 (6) Oct. 2023 / JST-4151-2022

 

A Systematic Review of Ergonomics Risk Assessment Methods for Pushing and Pulling Activities at Workplace

Hari Krishnan Tamil Selvan and Mohd Nasrull Abdol Rahman

Pertanika Journal of Tropical Agricultural Science, Volume 31, Issue 6, October 2023

DOI: https://doi.org/10.47836/pjst.31.6.29

Keywords: Ergonomics tools, manual handling, pushing and pulling, risk assessment method

Published on: 12 October 2023

It is vital to assess workplace pushing and pulling (PP) activities to manage musculoskeletal injuries among employees. However, there is still no clearly-suited risk assessment method. This systematic review aims to provide an overview of risk assessment methods for PP activities at the workplace. Thus, the review employed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Two primary journal databases were searched, namely Scopus and Science Direct. Furthermore, to ensure the robustness of the study, the searches were expended via handpicking, snowball identification, and consultation with ergonomics experts. Atlas.ti version 8 software was used to analyse the identified articles thematically. The search resulted in nine articles eligible for the systematic analysis. From the articles, six assessment methods used force measurement as the main indicators, while three assessment methods used the weight of the load as measurement indicators. The assessment tools did not cover all the risk factors for PP activities. Besides, there was a lack of evidence showing the assessment tools or methods' reliability, validity, and usability. This systematic review highlighted the advantages and limitations of existing assessment methods, and no one method fits all. The findings showed that the assessment methods for PP activities still needed a force measurement and did not cover all the significant risk factors associated with PP. In addition, no clarifications were presented regarding the assessment methods’ reliability, validity, and applicability.

  • Al-Eisawi, K. W., Kerk, C. J., Congleton, J. J., Amendola, A. A., Jenkins, O. C., & Gaines, W. G. (1999). The effect of handle height and cart load on the initial hand forces in cart pushing and pulling. Ergonomics, 42(8), 1099-1113. https://doi.org/10.1080/001401399185162

  • Ayoub, M. M., & Dempsey, P. G. (1999). The psychophysical approach to manual materials handling task design. Ergonomics, 42(1), 17-31. https://doi.org/10.1080/001401399185775

  • Bannigan, K., & Watson, R. (2009). Reliability and validity in a nutshell. Journal of Clinical Nursing, 18(23), 3237-3243. https://doi.org/10.1111/j.1365-2702.2009.02939.x

  • Baril-Gingras, G., & Lortie M. (1995). The handling of objects other than boxes: Univariate analysis of handling techniques in a large transport company. Ergonomics, 38(5), 905-925. https://doi.org/10.1080/00140139508925159

  • Bennett, A. I., Todd, A. I., & Desai, S. D. (2011). Pushing and pulling, technique and load effects: An electromyographical study. Work, 38(3), 291-299. https://doi.org/10.3233/WOR-2011-1132

  • Castro, C., De la Vega E., Báez, G., & Carrasco, F. (2012). Maximum force levels in different positions of shoulder and elbow. Work, 41, 5488-5490. https://doi.org/10.3233/WOR-2012-0861-5488.

  • Chaffin, D. B., Andres, R. O., & Garg, A. (1983). Volitional postures during maximal push/pull exertions in the sagittal plane. Human Factors, 25(5), 541-550. https://doi.org/10.1177/001872088302500508

  • Chen, S. H., Lee, Y. H., & Lin, C. J. (2015). Effects of load position and force direction on back muscle loading in one-wheeled wheelbarrow tasks. Work, 51, 113-119. https://doi.org/10.3233/WOR-141841

  • Cohen, A. L., Gjessing, C. C., Fine, L. J., Bernard, B. P., & McGlothlin, J. D. (1997). Elements of ergonomics programs: A primer based on workplace evalutaions of musculoskeletal disorders. U.S. Department of Health and Human Services. https://www.cdc.gov/niosh/docs/97-117/pdfs/97-117.pdf

  • Cook, D. A., & Beckman, T. J. (2006). Current concepts in validity and reliability for psychometric instruments: Theory and application. American Journal of Medicine, 119(2), 166.e7-166.e16. https://doi.org/10.1016/j.amjmed.2005.10.036

  • Cuervo, C. A., Sarmiento, A., Quintana, L., Schulze, L. J., & Delclos, G. (2003). Determination of the maximum peak forces in the activities of pushing and pulling by experienced female workers in Colombia. International Journal of Industrial Engineering-Theory Applications and Practice, 10(4), 600-606.

  • David, G. C. (2005). Ergonomic methods for assessing exposure to risk factors for work-related musculoskeletal disorders. Occupational Medicine, 55(3), 190-199. https://doi.org/10.1093/occmed/kqi082

  • Douwes, M., Könemann, R., Hoozemans, M., Kuijer, P., & Vermeulen, H. (2019). DUTCH: A new tool for practitioners for risk assessment of push and pull activities. Annals of Work Exposures and Health, 63(2), 137-144. https://doi.org/10.1093/annweh/wxy101

  • Eliasson, K. (2017). Occupational health services in the prevention of musculoskeletal disorders: Processes, tools and organizational aspects (Doctoral dissertation). KTH Royal Institute of Technology, Sweden. https://www.diva-portal.org/smash/record.jsf?pid=diva2%3A1069024&dswid=137

  • Ferreira, J., Smith, M., & Hill, H. (2007). Evaluating the Feasibility of Developing Assessment Charts for High Risk Pushing and Pulling Operations. Health and Safety Executive.

  • Frost, D. M., Beach, T. A. C., Crosby, I., & McGill, S. M. (2015). Firefighter injuries are not just a fireground problem. Work, 52, 835-842. https://doi.org/10.3233/wor-152111

  • Gyemi, D. L., van Wyk, P. M., Statham, M., Casey, J., & Andrews, D. M. (2016). 3D peak and cumulative low back and shoulder loads and postures during greenhouse pepper harvesting using a video-based approach. Work, 55, 817-829. https://doi.org/10.3233/WOR-162442

  • Health and Safety Laboratory. (2013). Further Work for the Development of an Inspection Tool for Risk Assessment of Pushing and Pulling Force Exertion. London. https://www.hse.gov.uk/research/rrhtm/rr998.htm

  • Hoozemans, M. J. M., Kuijer, P., Kingma, I., van Dieën, J. H., de Vries, W. H. K., van der Woude, L. H. V., Veegar, D. J., van der Beek, A. J., & Frings-Dresen, M. H. W. (2004). Mechanical loading of the low back and shoulders during pushing and pulling activities. Ergonomics, 47(1), 1-18. https://doi.org/10.1080/00140130310001593577

  • Hoozemans, M. J. M., van der Beek, A. J., Frings-Dresen, M. H. W., van der Woude, L. H. V., & van Dijk, F. J. H. (2002). Pushing and pulling in association with low back and shoulder complaints. Occupational & Environmental Medicine, 59(10), 696-702. https://doi.org/10.1136/oem.59.10.696

  • Hoozemans, M. J. M., van der Beek, A. J., Frings-Dresen, M. H. W., van Dijk, F. J. H., & van der Woude, L. H. V. (1998). Pushing and pulling in relation to musculoskeletal disorders: A review of risk factors. Ergonomics, 41(6), 757-781. https://doi.org/10.1080/001401398186621

  • International Organization for Standardization. (2007). ISO 11228-2:2007: Ergonomics -Manual Handling-Part 2: Pushing and Pulling. International Organization for Standardization [ISO]. Geneva. https://www.iso.org/standard/26521.html

  • Jahrami, H., Khandakji, S., Al-Shorbaji, N., Al-Bayati, S., & Hussain, A. (2019). Assessing ergonomic risks using the Quick Exposure Check (QEC) and the Rapid Entire Body Assessment (REBA): A comparative study. Work, 62(2), 291-299. https://doi.org/10.3233/WOR-192910

  • Jung, M., Haight, J. M., & Freivalds, A. (2005). Pushing and pulling carts and two-wheeled hand trucks. International Journal of Industrial Ergonomics, 35, 79-89. https://doi.org/10.1016/j.ergon.2004.08.006

  • Kadikon, Y., & Rahman, M. N. A. (2016). Manual material handling risk assessment tool for assessing exposure to risk factors of work related musculoskeletal disorders: A review. Journal of Engineering & Applied Sciences, 11(10), 2226-2232.

  • Kuijer, P. P. F. M., Hoozemans, M. J. M., & Frings-Dresen, M. H. W. (2007). A different approach for the ergonomic evaluation of pushing and pulling in practice. International Journal of Industrial Ergonomics, 37(11-12), 855-862. https://doi.org/10.1016/j.ergon.2007.07.011

  • Laws of Malaysia. (1994). Act 514: Occupational Safety and Health Act 1994. http://www.dosh.gov.my/index.php/en/legislation/acts/23-02-occupational-safety-and-health-act-1994-act-514/file

  • Lee, T. H. (2018). Foot placement strategy in pushing and pulling. Work, 59(2), 243-247. https://doi.org/10.3233/wor-172671

  • Li, G., & Buckle, P. (1992). Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods. Ergonomics, 42(5), 674-695. https://doi.org/10.1080/001401399185388

  • Lind, C. (2017). Assessment and Design of Industrial Manual Handling to Reduce Physical Ergonomics Hazards - Use and Development of Assessment Tools (Doctoral dissertation). KTH Royal Institute of Technology, Sweden. https://www.diva-portal.org/smash/record.jsf?pid=diva2%3A1094542&dswid=-9633

  • Lind, C. (2018). Pushing and pulling: An assessment tool for occupational health and safety practitioners. International Journal of Occupational Safety and Ergonomics, 24(1), 14-26. http://dx.doi.org/10.1080/10803548.2016.1258811

  • Marras, W. S., Knapik, G. G., & Ferguson, S. (2009). Loading along the lumbar spine as influence by speed, control, load magnitude, and handle height during pushing. Clinical Biomechanics, 24(2), 155-163. http://dx.doi.org/10.1016/j.clinbiomech.2008.10.007

  • Mital, A., Nicholson, A. S., & Ayoub, M. M. (1997). A Guide to Manual Materials Handling (2nd ed.). CRC Press.

  • Moher, D., Liberati, A., Tetzlaff, J., Altman, D. G., & The PRISMA Group. (2009). Preferred reporting items for systematic reviews and meta-analyses: The PRISMA statement. PLoS Medicine, 6(7), Article e1000097. https://doi.org/10.1371/journal.pmed.1000097

  • Monaco, M. G. L., Uccello, R., Muoio, M., Greco, A., Spada, S., Coggiola, M., Pedata, P., Caputo, F., Chiodini, P., & Miraglia, N. (2019). Work-related upper limb disorders and risk assessment among automobile manufacturing workers: A retrospective cohort analysis. Work, 64(4), 755-761. https://doi.org/10.3233/WOR-193037

  • Occhipinti, E., & Colombini, D. (2015). Ergonomic risk assessment tools in occupational safety and health management: A review. Safety and Health at Work, 6(1), 1-13. https://doi.org/10.1016/j.shaw.2014.07.005

  • Rahman, M. N. A., & Mohamad, S. S. (2017). Review on pen and paper based observational methods forassessing ergonomic risk factors of computer work. Work, 57(1), 69-77. https://doi.org/10.3233/WOR-172541

  • Rohani, J. M., Adeyemi, A. J., Aziz, R. A., & Rani, M. R. A. (2018). The inter-rater and intra-rater reliability analysis of workplace ergonomic risk assessment. Jurnal Teknologi, 80(1), 53-59.

  • Snook, S. H., & Ciriello, V. M. (1991). The design of manual handling tasks: Revised tables of maximum acceptable weights and forces. Ergonomics, 34(9), 1197-1213. https://doi.org/10.1080/00140139108964855

  • Snook, S. H., & Ciriello, V. M. (1974). The effects of heat stress on manual handling tasks. American Industrial Hygiene Association Journal, 35(11), 681-685. https://doi.org/10.1080/0002889748507088

  • Snook, S. H. (1978). The ergonomics society the society's lecture 1978. The design of manual handling tasks. Ergonomics, 21(12), 963-985. https://doi.org/10.1080/00140137808931804

  • Steinberg, U. (2012). New tools in Germany: Development and appliance of the first two KIM (“ lifting, holding and carrying” and“ pulling and pushing”) and practical use of these methods. Work, 41(Supplement 1), 3990-3996. https://doi.org/10.3233/WOR-2012-0698-3990

  • Sukadarin, E. H., Deros, B. M., Ghanib, J. A., Ismail, A. R., & Nawib, N. S. M. (2015, August 9-14). Inter-observer and intra-observer ergonomics measurement method reliability test. In Proceedings 19th Triennial Congress of the IEA (pp. 1-8). Melbourne, Australia.

  • Todd, A. I. (2012). Impact of hand forces and start/stop frequency on physiological responses to three forms of pushing and pulling: A South African perspective. Work, 41(Supplement 1), 1588-1593. https://doi.org/10.3233/WOR-2012-0357-1588.

  • Waters, T., Lloyd, J. D., Hernandez, E., & Nelson, A. (2011). AORN ergonomic tool 7: Pushing, pulling, and moving equipment on wheels. AORN Journal, 94(3), 254-260. http://dx.doi.org/10.1016/j.aorn.2010.09.035

  • Xiao, Y., & Watson, M. (2019). Guidance on conducting a systematic literature review. Journal of Planning Education and Research, 39(1), 93-112. https://doi.org/10.1177/0739456X17723971

  • Younger, P. (2010). Learning zone using google scholar to conduct. Nursing Standard, 24(45), 40-48. https://doi.org/10.7748/ns.24.45.40.s51

  • Zetterberg, C., Heiden, M., Lindberg, P., Nylén, P., & Hemphälä, H. (2019). Reliability of a new risk assessment method for visual ergonomics. International Journal of Industrial Ergonomics, 72, 71-79. https://doi.org/10.1016/j.ergon.2019.04.002

ISSN 1511-3701

e-ISSN 2231-8542

Article ID

JST-4151-2022

Download Full Article PDF

Share this article

Related Articles