In this study, palm olein-based grease with a micro-molybdenum disulfide (MoS₂) additive has been developed. The grease was prepared using various MoS₂ concentrations to investigate the role of additives in improving grease performance. A four-ball tribological test was conducted to investigate the surface morphology, wear depth, and volume loss of the steel ball. The results indicated that the MoS₂ additive reduced the coefficient of friction and wear scar diameter compared to pure palm olein grease. The value of 0.5 wt.% was considered the optimum value, reflecting the best grease performance indicated by low friction coefficient, wear diameter, wear depth, and volume loss. Elemental analysis revealed that the MoS₂ additive was deposited onto the wear tracks, improving the surface protection. Thus, this additive was found to have a good potential for improving palm olein-based grease.

• Abdollah, M. F., Amiruddin, H., & Jamallulil, A. D. (2020). Experimental analysis of tribological performance of palm oil blended with hexagonal boron nitride nanoparticles as an environment-friendly lubricant. The International Journal of Advanced Manufacturing Technology, 106, 4183-4191. https://doi.org/10.1007/s00170-019-04906-5

• Abdulbari, H. A., & Zuhan, N. (2018). Grease formulation from palm oil industry wastes. Waste and Biomass Valorization, 9(12), 2447-2457. https://doi.org/10.1007/s12649-018-0237-6

• American Society for Testing and Materials. (2017). Standard test methods for cone penetration of lubricating grease (ASTM D217-02). ASTM International.

• American Society for Testing and Materials. (2010). Standard test method for dropping point of lubricating grease (ASTM D556-02). ASTM International.

• American Society for Testing and Materials. (2010). Standard test method for wear preventive characteristics of lubricating grease (Four-ball method) (ASTM D 2266 – 01). ASTM International

• Bagi, S. D., & Aswath, P. B. (2015). Mechanism of friction and wear in MoS2 and ZDDP/F-PTFE greases under spectrum loading conditions. Lubricants, 3(4), 687-711. https://doi.org/10.3390/lubricants3040687

• Blau, P. (2005). On the nature of running-in. Tribology International, 38(11-12), 1007-1012. https://doi.org/10.1016/j.triboint.2005.07.020

• Borda, F. L. G., Oliveira, S. J. R., Lazaro, L. M. S. M., & Leiroz, A. J. K. (2018). Experimental investigation of the tribological behavior of lubricants with additive containing copper nanoparticles. Tribology International, 117, 52-58. https://doi.org/10.1016/j.triboint.2017.08.012

• Chaurasia, S. K., Singh, N. K., & Singh, L. K. (2020). Friction and wear behavior of chemically modified Sal (Shorea Robusta) oil for bio based lubricant application with effect of CuO nanoparticles. Fuel, 282, Article 118762. https://doi.org/10.1016/j.fuel.2020.118762

• Du, S., Sun, J., & Wu, P. (2018). Preparation, characterization and lubrication performances of graphene oxide-TiO2 nanofluid in rolling strips. Carbon, 140, 338-351. https://doi.org/10.1016/j.carbon.2018.08.055

• Fan, X., Li, W., Li, H., Zhu, M., Xia, Y., & Wang, J. (2018). Probing the effect of thickener on tribological properties of lubricating greases. Tribology International, 118, 128-139. https://doi.org/10.1016/j.triboint.2017.09.025

• Fox, N. J., & Stachowiak, G. W. (2007). Vegetable oil-based lubricants - A review of oxidation. Tribology International, 40(7), 1035-1046. https://doi.org/10.1016/j.triboint.2006.10.001

• Gong, L., Qian, S., Wang, W., Ni, Z., & Tang, L. (2021). Influence of nano-additives (nano-PTFE and nano-CaCO3) on tribological properties of food-grade aluminum-based grease. Tribology International, 160, Article 107014. https://doi.org/10.1016/j.triboint.2021.107014

• Gulzar, M., Mahmood, K., Zahid, R., Alabdulkarem, A., Masjuki, H. H., Kalam, M. A., Varman, M., Zulkifli, N. W. M., Ahmad, P., & Malik, M. S. S. (2017). The effect of particle size on the dispersion and wear protection ability of MoS2 particles in polyalphaolefin and trimethylolpropane ester. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(8), 987-998. https://doi.org/10.1177/1350650117749404

• Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Mufti, R., Mohd Zulkifli, N. W., Yunus, R., & Zahid, R. (2015). Improving the AW/EP ability of chemically modified palm oil by adding CuO and MoS2 nanoparticles. Tribology International, 88, 271-279. https://doi.org/10.1016/j.triboint.2015.03.035

• He, Q., Li, A., Guo, Y., Liu, S., Zhang, Y., & Kong, L. (2018). Tribological properties of nanometer cerium oxide as additives in lithium grease. Journal of Rare Earths, 36(2), 209-214. https://doi.org/10.1016/j.jre.2017.09.004

• Heikal, E. K., Elmelawy, M. S., Khalil, S. A., & Elbasuny, N. M. (2017). Manufacturing of environment friendly biolubricants from vegetable oils. Egyptian Journal of Petroleum, 26(1), 53-59. https://doi.org/10.1016/j.ejpe.2016.03.003

• Holinski, R., & Gänsheimer, J. (1972). A study of the lubricating mechanism of molybdenum disulfide. Wear, 19(3), 329-342. https://doi.org/10.1016/0043-1648(72)90124-X

• Hou, X., Jiang, H., Ali, M. K. A., Liu, H., Su, D., & Tian, Z. (2020). Dispersion behavior assessment of the molybdenum disulfide nanomaterials dispersed into poly alpha olefin. Journal of Molecular Liquids, 311, Article 113303. https://doi.org/10.1016/j.molliq.2020.113303

• Hu, E. Z., Xu, Y., Hu, K. H., & Hu, X. G. (2017). Tribological properties of 3 types of MoS2 additives in different base greases. Lubrication Science, 29(8), 541-555. https://doi.org/10.1002/ls.1387

• Hu, X. (2005). On the size effect of molybdenum disulfide particles on tribological performance. Industrial Lubrication and Tribology, 57(6), 255-259. https://doi.org/10.1108/00368790510622353

• Jabal, M. H., Ani, F. N., & Syahrullail, S. (2014). The tribological characteristic of the blends of RBD palm olein with mineral oil using four-ball tribotester. Jurnal Teknologi, 69(6), 11-14. https://doi.org/10.11113/jt.v69.3232

• Koshy, C. P., Rajendrakumar, P. K., & Thottackkad, M. V. (2015). Evaluation of the tribological and thermo-physical properties of coconut oil added with MoS2 nanoparticles at elevated temperatures. Wear, 330-331, 288-308. https://doi.org/10.1016/j.wear.2014.12.044

• Kozdrach, R., & Skowroński, J. (2018). The application of polyvinylpyrrolidone as a modifier of tribological properties of lubricating greases based on linseed oil. Journal of Tribology, 140(6), Article 061801. https://doi.org/10.1115/1.4040054

• Kumar, N., Saini, V., & Bijwe, J. (2020). Performance properties of lithium greases with PTFE particles as additive: Controlling parameter-size or shape? Tribology International, 148, Article 106302. https://doi.org/10.1016/j.triboint.2020.106302

• Mannekote, J. K., & Kailas, S. V. (2012). The effect of oxidation on the tribological performance of few vegetable oils. Journal of Materials Research and Technology, 1(2), 91-95. https://doi.org/10.1016/S2238-7854(12)70017-0

• Mushtaq, Z., & Hanief, M. (2021). Evaluation of tribological performance of jatropha oil modified with molybdenum disulphide micro-particles for steel-steel contacts. Journal of Tribology, 143(2), Article 021401. https://doi.org/10.1115/1.4047752

• Nabhan, A., Rashed, A., Ghazaly, N. M., Abdo, J., & Haneef, M. D. (2021). Tribological properties of Al2O3 nanoparticles as lithium grease additives. Lubricants, 9(1), Article 9. https://doi.org/10.3390/lubricants9010009

• Nagendramma, P., & Kumar, P. (2015). Eco-friendly multipurpose lubricating greases from vegetable residual oils. Lubricants, 3(4), 628-636. https://doi.org/10.3390/lubricants3040628

• Nowak, P., Kucharska, K., & Kamiński, M. (2019). Ecological and health effects of lubricant oils emitted into the environment. International Journal of Environmental Research and Public Health, 16(16), Article 3002. https://doi.org/10.3390/ijerph16163002

• Pande, G., Akoh, C. C., & Lai, O. M. (2012). 19 - Food uses of palm oil and its components. In O. M. Lai, C. P. Tan & C. C. Akoh (Eds.), Palm Oil (pp. 561-586). AOCS Press. https://doi.org/10.1016/B978-0-9818936-9-3.50022-8

• Qiang, H., Anling, L., Yangming, Z., Liu, S., & Yachen, G. (2017). Experimental study of tribological properties of lithium-based grease with Cu nanoparticle additive. Tribology-Materials, Surfaces & Interfaces, 11(2), 75-82. https://doi.org/10.1080/17515831.2017.1311560

• Quinchia, L. A., Delgado, M. A., Reddyhoff, T., Gallegos, C., & Spikes, H. A. (2014). Tribological studies of potential vegetable oil-based lubricants containing environmentally friendly viscosity modifiers. Tribology International, 69, 110-117. https://doi.org/10.1016/j.triboint.2013.08.016

• Razak, I. H. A., & Ahmad, M. A. (2021). Tribological behavior of calcium complex palm-biogrease with green additives. Tribology in Industry, 43(1), 139-149. https://doi.org/10.24874/ti.1002.11.20.02

• Reeves, C. J., Menezes, P. L., Jen, T. C., & Lovell, M. R. (2015). The influence of fatty acids on tribological and thermal properties of natural oils as sustainable biolubricants. Tribology International, 90, 123-134. https://doi.org/10.1016/j.triboint.2015.04.021

• Srinivas, V., Thakur, R. N., Jain, A. K., & Babu, M. S. (2017). Tribological studies of transmission oil dispersed with molybdenum disulfide and tungsten disulfide nanoparticles. Journal of Tribology, 139(4), Article 041301. https://doi.org/10.1115/1.4034766

• Sukirno, Fajar, R., Bismo, S., & Nasikin, M. (2009). Biogrease based on palm oil and lithium soap thickener: Evaluation of antiwear property. World Applied Sciences Journal, 6(30), 401-407.

• Sukirno, Ludi, Fajar, R., Bismo, & Nasikin. (2010). Anti-wear properties of bio-grease from modified palm oil and calcium soap thickener. Agricultural Engineering International: The CIGR Journal, 12(2), 64-69.

• Tabee, E., Azadmard-Damirchi, S., Jägerstad, M., & Dutta, P. C. (2008). Effects of α-tocopherol on oxidative stability and phytosterol oxidation during heating in some regular and high-oleic vegetable oils. Journal of the American Oil Chemists’ Society, 85(9), 857-867. https://doi.org/10.1007/s11746-008-1274-2

• Wang, W., Zhao, W., Ma, Q., Kouediatouka, A. N., Zhang, H., Dong, G., Hua, M., & Tam, H. Y. (2022). Synergistic lubrication for textured surfaces using polar and nonpolar lubricants. Journal of Tribology, 145(1), Article 012201. https://doi.org/10.1115/1.4055715

• Waqas, M., Zahid, R., Bhutta, M. U., Khan, Z. A., & Saeed, A. (2021). A review of friction performance of lubricants with nano additives. Materials, 14(21), Article 6310. https://doi.org/10.3390/ma14216310

• Winer, W. O. (1967). Molybdenum disulfide as a lubricant: A review of the fundamental knowledge. Wear, 10(6), 422-452. https://doi.org/10.1016/0043-1648(67)90187-1

• Wu, H., Wang, L., Johnson, B., Yang, S., Zhang, J., & Dong, G. (2018). Investigation on the lubrication advantages of MoS2 nanosheets compared with ZDDP using block-on-ring tests. Wear, 394-395, 40-49. https://doi.org/10.1016/j.wear.2017.10.003

• Xu, Z. Y., Hu, K. H., Han, C. L., Hu, X. G., & Xu, Y. F. (2013). Morphological influence of molybdenum disulfide on the tribological properties of rapeseed oil. Tribology Letters, 49(3), 513-524. https://doi.org/10.1007/s11249-012-0092-8

• Yahaya, W. M. A. W., Dandan, M. A., Samion, S., & Musa, M. N. (2018). A comprehensive review on palm oil and the challenges using vegetable oil as lubricant base-stock. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52(2), 182-197.

• Yu, R., Liu, J., & Zhou, Y. (2019). Experimental study on tribological property of MoS2 nanoparticle in castor oil. Journal of Tribology, 141(10), Article 102001. https://doi.org/10.1115/1.4044294

• Zulhanafi, P., & Syahrullail, S. (2019). The tribological performances of super olein as fluid lubricant using four-ball tribotester. Tribology International, 130, 85-93. https://doi.org/10.1016/j.triboint.2018.09.013