Concrete is the most widely used construction material in the world. It is now possible to construct structures out of concrete because this durable compound that consists of water, aggregate, and Portland cement not only gives us many scopes of design but also has a very high compressive strength at a low cost. This paper deals with alternative materials for the most common construction material, cement-based concrete and polymer concrete (PC), containing waste tin fibres. The study covers the fabrication of polymer concrete and the execution of three tests: compressive strength, flexural tensile, and splitting tensile. Tests were conducted to determine the mechanical properties of the PC, and the results were analysed and evaluated on several PC specimens with different ratios of waste tin fibre. The results showed that using waste tin as fibre reinforcement in PC would substantially enhance the overall mechanical performance. Specifically, the optimum amount of waste tin as reinforcement in PC was 0.16% for compressive and splitting tensile strengths, while 0.20% was the optimum fibre loading for the flexural tensile strength. In this case, a positive outcome was found at a constant resin-to-filler ratio of 40:60 by volume and a matrix-to-aggregate ratio of 1:1.35 by weight.

• ACI 318-11. (2011). Building code requirements for structural concrete (ACI 318-11) and commentary. American Concrete Institute. https://www.pecivilexam.com/Study_Documents/Struc-Materials-Online/ACI_318-Building-Code-2011.pdf

• Afroughsabet, V., & Ozbakkaloglu, T. (2015). Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers. Construction and Building Materials, 94, 73-82. https://doi.org/10.1016/j.conbuildmat.2015.06.051

• Ahmadi, M., Shafabakhsh, G. A., Di Mascio, P., & Hassani, A. (2021). Failure behavior of functionally graded roller compacted concrete pavement under mode I and III fracture. Construction and Building Materials, 307, Article 124942. https://doi.org/10.1016/j.conbuildmat.2021.124942

• Al-Nini, A., Nikbakht, E., Syamsir, A., Shafiq, N., Mohammed, B. S., Al-Fakih, A., Al-Nini, W., & Amran, Y. H. M. (2020). Flexural behavior of double-skin steel tube beams filled with fiber-reinforced cementitious composite and strengthened with CFRP sheets. Materials, 13(14), Article 3064. https://doi.org/10.3390/ma13143064

• Ali, A., & Ansari, A. A. (2013. April 12-13). Polymer concrete as innovative material for development of sustainable architecture. In 2nd International Conference on Emerging Trends in Engineering & Technology (pp. 1-4). Teerthanker Mahaveer University, India. https://doi.org/10.13140/2.1.4761.5040

• Asdollah-Tabar, M., Heidari-Rarani, M., & Aliha, M. R. M. (2021). The effect of recycled PET bottles on the fracture toughness of polymer concrete. Composites Communications, 25, Article 100684. https://doi.org/10.1016/j.coco.2021.100684

• ASTM C39/C39M-01. (2001). Standard test method for compressive strength of cylindrical concrete specimens. ASTM International. https://normanray.files.wordpress.com/2010/10/kuliah-7b-beton-segar-astm-c39.pdf

• ASTM C78/C78M-18. (2016). Standard test method for flexural strength of concrete (using simple beam with third-point loading). ASTM International. https://www.scribd.com/document/426461328/ASTM-C78-Flexural-Strength-of-Concrete

• ASTM C293/C293M-16. (2016). Standard test method for flexural strength of concrete (using simple beam with center-point loading). ASTM International. https://webstore.ansi.org/standards/astm/astmc293c293m16

• Atiqah, A., Ismail, N., Lim, K. K., Jalar, A., Bakar, M. A., Maleque, M. A., Ilyas, R. A., & Supian, A. B. M. (2021). Properties of recycled metal matrix composites. In R. A. Ilyas, S. M. Sapuan, & E. Bayraktar (Eds.), Recycling of Plastics, Metals, and Their Composites (pp. 93-108). CRC press. https://doi.org/https://doi.org/10.1201/9781003148760

• Berrocal, C. G., Löfgren, I., & Lundgren, K. (2018). The effect of fibres on steel bar corrosion and flexural behaviour of corroded RC beams. Engineering Structures, 163, 409-425. https://doi.org/10.1016/j.engstruct.2018.02.068

• Bulut, H. A., & Şahin, R. (2017). A study on mechanical properties of polymer concrete containing electronic plastic waste. Composite Structures, 178, 50-62. https://doi.org/10.1016/j.compstruct.2017.06.058

• Esfahani, M. S., Janbaz, S., & Mirmazhari, S. (2016). Effect of various types of fillers on mechanical properties of concrete. International Journal of Civil Engineering, Construction and Estate Management, 4(3), 20-28.

• Ferdous, W., Manalo, A., Aravinthan, T., & Erp, G. V. (2016). Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers. Construction and Building Materials, 124, 287-300. https://doi.org/10.1016/j.conbuildmat.2016.07.111

• Frigione, M. (2013). Concrete with polymers. In Eco-Efficient Concrete (pp. 386-436). Woodhead Publishing Limited. https://doi.org/10.1533/9780857098993.3.386

• Gao, Y., romero, P., Zhang, H., Huang, M., & Lai, F. (2019). Unsaturated polyester resin concrete: A review. Construction and Building Materials, 228, Article 116709. https://doi.org/10.1016/j.conbuildmat.2019.116709

• Hameed, A. M., & Hamza, M. T. (2019). Characteristics of polymer concrete produced from wasted construction materials. Energy Procedia, 157(2018), 43-50. https://doi.org/10.1016/j.egypro.2018.11.162

• Hashemi, M. J., Jamshidi, M., & Aghdam, J. H. (2018). Investigating fracture mechanics and flexural properties of unsaturated polyester polymer concrete (UP-PC). Construction and Building Materials, 163, 767-775. https://doi.org/10.1016/j.conbuildmat.2017.12.115

• Ismail, A. S., Jawaid, M., Hamid, N. H., Yahaya, R., Hassan, A., Asim, M., & Supian, A. B. M. (2022). Effect of curing temperature on mechanical properties of bio-phenolic/epoxy polymer blends. Journal of Polymers and the Environment, 30, 878-885. https://doi.org/10.1007/s10924-021-02244-w

• Kamal, N. L. M., Beddu, S., Syamsir, A., Mohammad, D., Itam, Z., Hamid, Z. A. A., & Manan, T. S. A. (2019). Immobilization of heavy metals for building materials in the construction industry - An overview. Materials Today: Proceedings, 17, 787-791. https://doi.org/10.1016/j.matpr.2019.06.363

• Kumlutaş, D., Tavman, I. H., & Turhan Çoban, M. (2003). Thermal conductivity of particle filled polyethylene composite materials. Composites Science and Technology, 63(1), 113-117. https://doi.org/10.1016/S0266-3538(02)00194-X

• Luxchem, P. I. (2018). Material Safety Data Sheet - Unsaturated Polyester Resins. LUXCHEM. http://www.luxchem.com.my/img/pdf/reversol_resin.pdf

• Martínez-López, M., Martínez-Barrera, G., Salgado-Delgado, R., & Gencel, O. (2021). Recycling polypropylene and polyethylene wastes in production of polyester based polymer mortars. Construction and Building Materials, 274, Article 121487. https://doi.org/10.1016/j.conbuildmat.2020.121487

• Mohamad, N. J. (2014). Timber Reinforcement in Reinforced Concrete Beam for Light Structure (Doctoral dissertation). University Malaysia Pahang, Malaysia. https://core.ac.uk/download/pdf/159184667.pdf

• Mohamad, N., Muthusamy, K., Embong, R., Kusbiantoro, A., Hashim, M. H., & Hanafi, M. (2022). Environmental impact of cement production and solutions : A review. Materials Today: Proceedings, 48, 741-746. https://doi.org/10.1016/j.matpr.2021.02.212

• Mohammed, A. A. (2018). Mechanical strength of concrete with PVC aggregates. In Use of Recycled Plastics in Eco-efficient Concrete (pp. 115-135). Elsevier Ltd. https://doi.org/10.1016/B978-0-08-102676-2.00006-2

• Muda, Z. C., Alam, M. A., Syamsir, A., Sulleman, S., Beddu, S., Mustapha, K. N., Thiruchelvam, S., Ismail, F. B., Usman, F., Kamal, N. L. M., Birima, A. H., Itam, Z., & Zaroog, O. S. (2016). The effect of thickness and mesh spacing on the impact resistance of ferrocement slab. IOP Conference Series: Earth and Environmental Science, 32, Article 012027. https://doi.org/10.1088/1755-1315/32/1/012027

• Muda, Z. C., Kamal, N. L. M., Syamsir, A., Sheng, C. Y., Beddu, S., Mustapha, K. N., Thiruchelvam, S., Usman, F., Alam, M. A., Birima, A. H., & Zaroog, O. S. (2016). Impact resistance performance of kenaf fibre reinforced concrete. IOP Conference Series: Earth and Environmental Science, 32, Article 012019. https://doi.org/10.1088/1755-1315/32/1/012019

• Niaki, M. H., Fereidoon, A., & Ahangari, M. G. (2018). Mechanical properties of epoxy/basalt polymer concrete: Experimental and analytical study. Structural Concrete, 19(2), 366-373. https://doi.org/10.1002/suco.201700003

• Oyebisi, S., Ede, A., Olutoge, F., & Omole, D. (2020). Geopolymer concrete incorporating agro-industrial wastes: Effects on mechanical properties, microstructural behaviour and mineralogical phases. Construction and Building Materials, 256, Article 119390. https://doi.org/10.1016/j.conbuildmat.2020.119390

• Parikh, K., & Modhera, C. D. (2012). Application of GFRP on preloaded retrofitted beam for enhancement in flexural strength. International Journal of Civil and Structural Engineering, 2(4), 1070-1080.

• Pil, L., Bensadoun, F., Pariset, J., & Verpoest, I. (2016). Why are designers fascinated by flax and hemp fibre composites? Composites Part A: Applied Science and Manufacturing, 83, 193-205. https://doi.org/10.1016/j.compositesa.2015.11.004

• Reddy, S. V. B., & Santhosha, V. (2018). Experimental study on fibre reinforced polymer concrete. International Journal of Applied Engineering Research, 13(15), 11844-11856.

• Ramadan, R., Jahami, A., Khatib, J., El-Hassan, H., & Elkordi, A. (2023). Improving structural performance of reinforced concrete beams with phragmites australis fiber and waste glass additives. Applied Sciences, 13(7), Article 4206. https://doi.org/10.3390/app13074206

• Sakai, E., Miyahara, S., Ohsawa, S., Lee, S. H., & Daimon, M. (2005). Hydration of fly ash cement. Cement and Concrete Research, 35(6), 1135-1140. https://doi.org/10.1016/j.cemconres.2004.09.008

• Saribiyik, M., Piskin, A., & Saribiyik, A. (2013). The effects of waste glass powder usage on polymer concrete properties. Construction and Building Materials, 47, 840-844. https://doi.org/10.1016/j.conbuildmat.2013.05.023

• Sonebi, M., Abdalqader, A., Fayyad, T., Amziane, S., & El-Khatib, J. (2022). Effect of fly ash and metakaolin on the properties of fiber-reinforced cementitious composites: A factorial design approach. Computers and Concrete, 29(5), 347-360. https://doi.org/10.12989/cac.2022.29.5.347

• Sosoi, G., Barbuta, M., Serbanoiu, A. A., Babor, D., & Burlacu, A. (2018). Wastes as aggregate substitution in polymer concrete. Procedia Manufacturing, 22, 347-351. https://doi.org/10.1016/j.promfg.2018.03.052

• Supian, A. B. M., Sapuan, S. M., Zuhri, M. Y. M., & Ya, H. H. (2016, December 28). A review of the development hybrid nature-synthetic fibre-reinforced composite in energy absorption tube applications. In Proceedings of 5th Postgraduate Seminar on Natural Fiber Composites (pp. 1-6). Universiti Putra Malaysia, Malaysia.

• Supian, A. B. M., Sapuan, S. M., Zuhri, M. Y. M., Zainudin, E. S., & Ya, H. H. (2018). Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review. Defence Technology, 14(4), 291-305. https://doi.org/10.1016/j.dt.2018.04.004

• Vaggar, G. B., Sirimani, V. B., Sataraddi, D. P., Hiremath, N. M., & Bhajantri, F. (2021). Effect of filler materials on thermal properties of polymer composite materials: A review. International Journal of Engineering Research & Technology (IJERT), 10(08), 1-5.

• Yan, L., Kasal, B., & Huang, L. (2016). A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo-polymer and polymer composites in civil engineering. Composites Part B: Engineering, 92, 94-132. https://doi.org/10.1016/j.compositesb.2016.02.002

• Yeon, J. H., Lee, H. J., & Yeon, J. (2020). Deformability in unsaturated polyester resin-based concrete: Effects of the concentration of shrinkage-reducing agent and type of filler. Materials, 13(3), 1-16. https://doi.org/10.3390/ma13030727

• Zabihi, O., Ahmadi, M., Nikafshar, S., Preyeswary, K. C., & Naebe, M. (2017). A technical review on epoxy-clay nanocomposites: Structure, properties, and their applications in fiber reinforced composites. Composites Part B: Engineering, 135, 1-24. https://doi.org/10.1016/j.compositesb.2017.09.066