PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

Bearing is an important part of the induction motor, whose function is to help the rotor spin. It contributes the highest percentage of damage compared to other parts. When operated in this condition, it causes overheating, imbalance in the rotation of the rotor shaft, sparks, and noise pollution to the environment. A bearing monitoring system must be implemented and developed to avoid further damage. Furthermore, a non-invasive technique through sound signals was developed in this study. A sound signal is easy to overlap with the noise from other sources. Environmental noise is unavoidable during data collection, affecting health monitoring accuracy (HM). Therefore, this study aims to develop an HM method for sound-based induction motors based on measurement differences, load variation, frequency calculations, and statistics. The distance measured was used as an independent variable of the non-machine noise. The load variations were also applied as required, and the operation of the motor varies according to users’ needs. In an effort to prevent negative environmental impacts, noise monitoring was carried out from the motor operation, and the results showed an HM of accuracy of 83.09%. The best distance for performing HM conditions is 100 cm and 83.59 dB(A). The noise value does not exceed the industrial worker threshold. Therefore, close surveillance of the motor’s condition tends to be conducted with or without a load. It is because the load variation does not affect the accuracy of health monitoring.

• AlShorman, O., Irfan, M., Saad, N., Zhen, D., Haider, N., Glowacz, A., & AlShorman, A. (2020). A review of artificial intelligence methods for condition monitoring and fault diagnosis of rolling element bearings for induction motor. Shock and Vibration, 2020, Article 8843759. https://doi.org/10.1155/2020/8843759

• AlShorman, O., Alkahatni, F., Masadeh, M., Irfan, M., Glowacz, A., Althobiani, F., Kozik, J., & Glowacz, W. (2021). Sounds and acoustic emission-based early fault diagnosis of induction motor: A review study. Advances in Mechanical Engineering, 13(2), Article 1687814021996915. https://doi.org/10.1177/1687814021996915

• Amanuel, T., Ghirmay, A., Ghebremeskel, H., Ghebrehiwet, R., & Bahlibi, W. (2021). Comparative analysis of signal processing techniques for fault detection in three phase induction motor. Journal of Electronics, 3(01), 61-76. https://doi.org/10.36548/jei.2021.1.006

• Aminian, O., Saraie, M., Ahadi, M., & Eftekhari, S. (2021). Association of the working environment noise with occupational stress in industrial workers. Journal of Public Health, 2021, Article 152. https://doi.org/10.1007/s10389-021-01605-y

• Barusu, M. R., & Deivasigamani, M. (2020). Non-invasive vibration measurement for diagnosis of bearing faults in 3-phase squirrel cage induction motor using microwave sensor. IEEE Sensors Journal, 21(2), 1026-1039. https://doi.org/10.1109/JSEN.2020.3004515

• Daraz, A., Alabied, S., Smith, A., Gu, F., & Ball, A. D. (2018, September 6-7). Detection and diagnosis of centrifugal pump bearing faults based on the envelope analysis of airborne sound signals. [Paper presentation]. 24th International Conference on Automation and Computing (ICAC), Newcastle Upon Tyne, UK. https://doi.org/10.23919/IConAC.2018.8749053

• Das, A., & Ray, S. (2020, February 28-29). A review on diagnostic techniques of bearing fault and its modeling in induction motor. [Paper presentation]. 2020 IEEE Calcutta Conference (CALCON), Kolkata, India. https://doi.org/10.1109/CALCON49167.2020.9106511

• Elasha, F., Greaves, M., Mba, D., & Fang, D. (2017). A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetry gearbox. Applied Acoustics, 115, 181-195. https://doi.org/10.1016/j.apacoust.2016.07.026

• Ewert, P., Kowalski, C. T., & Orlowska-Kowalska, T. (2020). Low-cost monitoring and diagnosis system for rolling bearing faults of the induction motor based on neural network approach. Electronics, 9(9), Article 1334. https://doi.org/10.3390/electronics9091334

• Glowacz, A., Glowacz, W., Glowacz, Z., & Kozik, J. (2018). Early fault diagnosis of bearing and stator faults of the single-phase induction motor using acoustic signals. Measurement, 113, 1-9. https://doi.org/10.1016/j.measurement.2017.08.036

• Gouda, O. E., & El‐Hoshy, S. H. (2020). Diagnostic technique for analysing the internal faults within power transformers based on sweep frequency response using adjusted R‐square methodology. IET Science, Measurement & Technology, 14(10), 1057-1068. https://doi.org/10.1049/iet-smt.2020.0048

• Goyal, D., Mongia, C., & Sehgal, S. (2021). Applications of digital signal processing in monitoring machining processes and rotary components: a review. IEEE Sensors Journal, 21(7), 8780-8804. https://doi.org/10.1109/JSEN.2021.3050718

• He, F., Xie, G., & Luo, J. (2020). Electrical bearing failures in electric vehicles. Friction, 8(1), 4-28. https://doi.org/10.1007/s40544-019-0356-5

• Karyatanti, I. D. P., Dewantara, B. Y., & Utomo, W. M. (2019). Healthy monitoring and fault detection outer race bearing in induction motor using stator current. International Journal of Integrated Engineering, 11(3), 181-193. https://doi.org/10.30880/ijie.2019.11.03.019

• Lucena-Junior, J. A., de Vasconcelos Lima, T. L., Bruno, G. P., Brito, A. V., de Souza Ramos, J. G. G., Belo, F. A., & Lima-Filho, A. C. (2020). Chaos theory using density of maxima applied to the diagnosis of three-phase induction motor bearings failure by sound analysis. Computers in Industry, 123, Article 103304. https://doi.org/10.1016/j.compind.2020.103304

• Priyastama, R., (2020). The Book of SPSS: Pengolahan & Analisis Data. Penerbit Anak Hebat Indonesia.

• Nirwan, N. W., & Ramani, H. B. (2022). Condition monitoring and fault detection in roller bearing used in rolling mill by acoustic emission and vibration analysis. Materials Today: Proceedings, 51, 344-354. https://doi.org/10.1016/j.matpr.2021.05.447

• Zhong, J. H., Wong, P. K., & Yang, Z. X. (2018). Fault diagnosis of rotating machinery based on multiple probabilistic classifiers. Mechanical Systems and Signal Processing, 108, 99-114. https://doi.org/10.1016/j.ymssp.2018.02.009