PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

 

e-ISSN 2231-8526
ISSN 0128-7680

Home / Regular Issue / JST Vol. 24 (1) Jan. 2016 / JST-0535-2014

 

Simulation of a Bioreactor with an Improved Fermentation Kinetics - Fluid Flow Model

Emily Liew Wan Teng and Law Ming Chiat

Pertanika Journal of Science & Technology, Volume 24, Issue 1, January 2016

Keywords: Bioreactor, CFD, ethanol, fermentation, kinetics, Rushton turbine

Published on: 28 Dec 2015

Ethanolic fermentation experiments were carried out using a stirred tank equipped with a Rushton turbine. The data were used to estimate kinetic parameters based on a newly developed kinetics model originated from Herbert's microbial kinetics model. This newly developed model took into account the effects of aeration rate (AR) and stirrer speed (SS). Experiment data i.e. glucose, ethanol and biomass concentrations obtained from different experiment sets were used for kinetics prediction. Assuming a perfectly-stirred condition, the kinetic parameters were initially estimated through solving Herbert's model equations. These estimated kinetic parameters were then incorporated in a Computational Fluid Dynamics (CFD) model but the simulation results did not agree well with the experiment findings. Based on the proposed CFD model, the kinetic parameters were corrected. The correction factors were expressed as functions of AR and SS. This analysis highlighted the need to estimate kinetic parameters based on CFD simulation because it is able to account for the spatial variation in a reactor. A sensitivity analysis of the kinetic parameters using the coupled CFD-fermentation kinetic model was carried out to further understand the influence of each set of kinetic parameters on the model prediction. It was found that the sensitivities of the kinetic parameters varied with the concentrations of glucose, ethanol and biomass.

ISSN 0128-7680

e-ISSN 2231-8526

Article ID

JST-0535-2014

Download Full Article PDF

Share this article

Recent Articles