PERTANIKA JOURNAL OF TROPICAL AGRICULTURAL SCIENCE

J

• Abdullah, S. F. A., Saleh, S. S. M., Mohammad, N. F., Idris, M. S., & Saliu, H. R. (2021). Effect of thermal treatment on natural dolomite. Journal of Physics: Conference Series, 2080(1), Article 012009. https://doi.org/10.1088/1742-6596/2080/1/012009
  
  Algoufi, Y. T., Kabir, G., & Hameed, B. H. (2017). Synthesis of glycerol carbonate from biodiesel by-product glycerol over calcined dolomite. Journal of the Taiwan Institute of Chemical Engineers, 70, 179-187. https://doi.org/10.1016/j.jtice.2016.10.039
  
  Arkame, Y., Harrati, A., Jannaoui, M., Et-Tayea, Y., Yamari, I., Sdiri, A., & Sadik, C. (2023). Effects of slag addition and sintering temperature on the technological properties of dolomite based porous ceramics. Open Ceramics, 13, Article 100333. https://doi.org/10.1016/j.oceram.2023.100333
  
  Arokiasamy, P., Abdullah, M. M. A. B., Rahim, S. Z. A., Luhar, S., Sandu, A. V., Jamil, N. H., & Nabiałek, M. (2022). Synthesis methods of hydroxyapatite from natural sources: A review. Ceramics International, 48(11), 14959–14979. https://doi.org/10.1016/j.ceramint.2022.03.064
  
  Azurahanim, C., Albert, E. L., Een, L. G., Zarin, M. A., & Yusoff, M. Z. M. (2022). Effect of thermal treatment on physical properties of Malaysian dolomitic limestone. International Journal of Electroactive Materials, 10(2022), 18-23.
  
  Buyang, Y., Suprapto, S., Nugraha, R. E., Holilah, H., Bahruji, H., Hantoro, R., Jalil, A. A., Oetami, T. P., & Prasetyoko, D. (2023). Catalytic pyrolysis of Reutealis trisperma oil using raw dolomite for bio-oil production. Journal of Analytical and Applied Pyrolysis, 169, Article 105852. https://doi.org/10.1016/j.jaap.2022.105852
  
  Cai, W. K., Liu, J. H., Zhou, C. H., Keeling, J., & Glasmacher, U. A. (2021). Structure, genesis and resources efficiency of dolomite: New insights and remaining enigmas. Chemical Geology, 573, Article 120191. https://doi.org/10.1016/j.chemgeo.2021.120191
  
  Chen, T., Li, H., Wang, H., Zou, X., Liu, H., Chen, D., & Zhou, Y. (2019). Removal of Pb(II) from aqueous solutions by periclase/calcite nanocomposites. Water, Air, and Soil Pollution, 230(12), Article 299. https://doi.org/10.1007/s11270-019-4354-z
  
  Chong, L. K., Osman, A. F., Fauzi, A. A. A., Alrashdi, A. A., & Halim, K. A. A. (2021). The mechanical and thermal properties of poly (Ethylene-co-vinyl acetate) (pecova) composites with pristine dolomite and organophilic microcrystalline dolomite (OMCD). Polymers, 13(18), Article 3034. https://doi.org/10.3390/polym13183034
  
  Choudhary, R., Koppala, S., & Swamiappan, S. (2015). Bioactivity studies of calcium magnesium silicate prepared from eggshell waste by sol-gel combustion synthesis. Journal of Asian Ceramic Societies, 3(2), 173–177. https://doi.org/10.1016/j.jascer.2015.01.002
  
  Collin, M. S., Venkatraman, S. K., Sriramulu, M., Shanmugam, S., Drweesh, E. A., Elnagar, M. M., Mosa, E. S., & Sasikumar, S. (2021). Solution combustion synthesis of functional diopside, akermanite, and merwinite bioceramics: Excellent biomineralization, mechanical strength, and antibacterial ability. Materials Today Communications, 27, Article 102365. https://doi.org/10.1016/j.mtcomm.2021.102365
  
  Dursun, F., & Coşkun, A. (2020). A preliminary study on material properties of the Zerzevan Castle, Turkey. In IOP Conference Series: Materials Science and Engineering (Vol. 949, No. 1, p. 012038). IOP Publishing. https://doi.org/10.1088/1757-899X/949/1/012038
  
  Fauzi, A. A. A., Osman, A. F., Alosime, E. M., Ibrahim, I., Halim, K. A. A., & Ismail, H. (2022). Strategies towards producing non-polar dolomite nanoparticles as nanofiller for copolymer nanocomposite. International Journal of Molecular Sciences, 23(20), Article 12620. https://doi.org/10.3390/ijms232012620
  
  Fauzi, A. A. A., Osman, A. F., Alrashdi, A. A., Mustafa, Z., & Halim, K. A. A. (2022). On the use of dolomite as a mineral filler and co-filler in the field of polymer composites: A review. Polymers, 14(14), Article 2843. https://doi.org/10.3390/polym14142843
  
  Fiume, E., Tulyaganov, D., Ubertalli, G., Verné, E., & Baino, F. (2020). Dolomite-foamed bioactive silicate scaffolds for bone tissue repair. Materials, 13(3), Article 628. https://doi.org/10.3390/ma13030628
  
  Hafriz, R. S. R. M., Salmiaton, A., Yunus, R., & Taufiq-Yap, Y. H. (2018). Green Biofuel production via catalytic pyrolysis of waste cooking oil using Malaysian dolomite catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 13(3), 489–501. https://doi.org/10.9767/bcrec.13.3.1956.489-501
  
  Harrati, A., Arkame, Y., Manni, A., Aqdim, S., Zmemla, R., Chari, A., El Bouari, A., El Amrani El Hassani, I. E., Sdiri, A., Hassani, F. O., & Sadik, C. (2022). Akermanite-based ceramics from Moroccan dolomite and perlite: Characterization and in vitro bioactivity assessment. Open Ceramics, 10, Article 100276. https://doi.org/10.1016/j.oceram.2022.100276
  
  Houghton, J. E., Behnsen, J., Duller, R. A., Nichols, T. E., & Worden, R. H. (2024). Particle size analysis: A comparison of laboratory-based techniques and their application to geoscience. Sedimentary Geology, 464, Article 106607. https://doi.org/10.1016/j.sedgeo.2024.106607
  
  Hu, M. N., Qu, X. J., Chen, X. L., He, D., Wang, G. Y., Liu, J. H., Roy, T., Kurniawan, A., & Zhou, C. H. (2024). Fabrication of a novel bone adhesive (crosslinked phytic acid-gelatin coordinated with magnesium phosphate and calcined dolomite, and montmorillonite) for enhancing adhesion strength and biocompatibility. Journal of Inclusion Phenomena and Macrocyclic Chemistry, 104(5–6), 317–334. https://doi.org/10.1007/S10847-024-01234-4
  
  Hu, M. N., Wang, G. Y., Liu, C. L., Roy, T., & Zhou, C. H. (2024). Mg2+ - Ca2+ chelating citric acid crosslinked gelatin, a bone adhesive composed of hydroxyapatite and calcined dolomite: Physicochemical characteristics and in-vitro biological activity. International Journal of Adhesion and Adhesives, 135, Article 10816. https://doi.org/10.1016/j.ijadhadh.2024.103816
  
  Hussin, K., Shamsul, J., Ruzaidi, C. M., Sobri, M. I., Nazry, M. S., & Nizar, K. (2006). The development of artificial marble from dolomite (Batu Reput) in Perlis. In KUKUM Engineering Research Seminar 2006 (pp. 617–621). ResearchGate. https://doi.org/10.13140/2.1.1044.8325
  
  Jablonski, M. O. M. (2015). Thermal behavior of natural dolomite. Journal of Thermal Analysis and Calorimetry, 119, 2239–2248. https://doi.org/10.1007/s10973-014-4301-6
  
  Kamarzamann, F. F., Abdullah, M. M. A. B., Abd Rahim, S. Z., Kadir, A. A., Jamil, N. H., Ibrahim, W. M. W., & Sandu, A. V. (2022). Hydroxyapatite / Dolomite alkaline activated material reaction in the formation of low temperature sintered ceramic as adsorbent materials. Construction and Building Materials, 349, Article 128603. https://doi.org/10.1016/j.conbuildmat.2022.128603
  
  Kambakhsh, H., Haqbin, M., Inanch, S., Qarizada, K., & Qarizada, D. (2024). Unveiling the geological significance and industrial application of limestone: A comprehensive review. The Journal of The Institution of Engineers Malaysia, 85(1). https://doi.org/10.54552/v85i1.238
  
  Khashbaatar, Z., Akama, S., Kano, N., & Kim, H. J. (2022). Development of a new dolomite-based adsorbent with phosphorus and the adsorption characteristics of arsenic (III) in an aqueous solution. Water, 14(7), Article 1102. https://doi.org/10.3390/w14071102
  
  Khoshraftar, Z., Masoumi, H., & Ghaemi, A. (2023). An insight into the potential of dolomite powder as a sorbent in the elimination of heavy metals: A review. Case Studies in Chemical and Environmental Engineering, 7, Article 100276. https://doi.org/10.1016/j.cscee.2022.100276
  
  Kurtulbaş, E., Yıldırım, E., Emik, S., & Şahin, S. (2020). A detailed study on the sorption characteristics of humic acid onto calcined dolomite. Journal of Molecular Structure, 1219, Article 128606. https://doi.org/10.1016/j.molstruc.2020.128606
  
  Li, C., Jia, D., Yang, X., Zhao, S., Li, C., Liu, G., Wang, Y., Ding, X. xin, Qin, S., & Song, W. (2024). Effects of dosage and reactivity of modified dolomite dust waste on mechanical properties and shrink-resist of mortar. Developments in the Built Environment, 17, Article 100308. https://doi.org/10.1016/j.dibe.2023.100308
  
  Li, L., Otake, Y., & Shimizu, T. (2024). Biomass volatile gasification using dolomite and dolomite-Ni/Al2O3 combinations. International Journal of Biomass & Renewables, 13(1), 9–15.
  
  Liu, Q., Cen, L., Yin, S., Chen, L., Liu, G., Chang, J., & Cui, L. (2008). A comparative study of proliferation and osteogenic differentiation of adipose-derived stem cells on akermanite and β-TCP ceramics. Biomaterials, 29(36), 4792–4799. https://doi.org/10.1016/j.biomaterials.2008.08.039
  
  Mandrino, D., Paulin, I., Kržmanc, M. M., & Škapin, S. D. (2018). Physical and chemical treatments influence on the thermal decomposition of a dolomite used as a foaming agent. Journal of Thermal Analysis and Calorimetry, 131, 1125–1134. https://doi.org/10.1007/s10973-017-6699-0
  
  Marzban, K., Rabiee, S. M., Zabihi, E., & Bagherifard, S. (2019). Nanostructured akermanite glass-ceramic coating on Ti6Al4V for orthopedic applications. Journal of Applied Biomaterials & Functional Materials, 17(2), 228080001879381. https://doi.org/10.1177/2280800018793819
  
  Mohammadi, H., Hei, B. Z., Ismail, Y. M. B., Shariff, K. A., & Noor, A. F. M. (2020). Green synthesis of calcium magnesium silicate (CMS-Akermanite) using natural biowastes by solid-state sintering route. Malaysian Journal of Microscopy, 16(2), 66–76.
  
  Mohammed, M. A. A., Salmiaton, A., Azlina, W. A. K. G. W., Amran, M. S. M., & Taufiq-Yap, Y. H. (2013). Preparation and characterization of Malaysian dolomites as a tar cracking catalyst in biomass gasification process. Journal of Energy, 2013, Article 791582. https://doi.org/10.1155/2013/791582
  
  Nabiyouni, M., Brückner, T., Zhou, H., Gbureck, U., & Bhaduri, S. B. (2018). Magnesium-based bioceramics in orthopedic applications. Acta Biomaterialia, 66, 23-43. https://doi.org/10.1016/j.actbio.2017.11.033
  
  Osman, A. F., Fauzi, A. A. A., Amin, M. B., Halim, K. A. A., & Ul-Hamid, A. (2022). Size reduction of dolomite into nano-size range through milling and tip-sonication processes. Materials Science Forum, 1075, 3–8. https://doi.org/10.4028/p-3zkle9
  
  Ramli, M., Maisarah, M. R., Saidi, N., Murniana, & Idris, N. (2022). Aceh local dolomite modified by alkali metals as a low-cost solid inorganic catalyst for biodiesel synthesis. IOP Conference Series: Earth and Environmental Science, 1034(1), Article 012027. https://doi.org/10.1088/1755-1315/1034/1/012027
  
  Resio, L. C. (2023). Characterization of Argentine dolostones with potential application in the manufacture of refractory materials. Open Ceramics, 15, Article 100374. https://doi.org/10.1016/j.oceram.2023.100374
  
  Resio, L. C. (2024). Dolomite thermal behaviour: A short review. Physics and Chemistry of Minerals, 51, Article 19. https://doi.org/10.1007/s00269-024-01272-x
  
  Rodriguez-Navarro, C., Kudlacz, K., & Ruiz-Agudo, E. (2012). The mechanism of thermal decomposition of dolomite: New insights from 2D-XRD and TEM analyses. American Mineralogist, 97(1). https://doi.org/10.2138/am.2011.3813
  
  Samad, H. A., Rashid, R. A., Selamat, M., Sultan, J., & Shah, A. (2019). Poly art mabrle: from waste to a commercial product. In 9th Mineral Symposium 2019 (pp. 1-6). ResearchGate.
  
  Shahraki, B. K., Mehrabi, B., & Dabiri, R. (2009). Thermal behavior of Zefreh dolomite mine (Centeral Iran). Journal of Mining and Metallurgy, Section B: Metallurgy, 45(1), 35–44. https://doi.org/10.2298/JMMB0901035S
  
  Sompech, S., Dasri, T., & Thaomola, S. (2016). Preparation and characterization of amorphous silica and calcium oxide from agricultural wastes. Oriental Journal of Chemistry, 32(4), Article 18. https://doi.org/10.13005/ojc/320418
  
  Srinivasan, S., Dodson, D., Charles, M. B. J., Wallen, S. L., Albarelli, G., Kaushik, A., Hickman, N., Chaudhary, G. R., Stefanakos, E., & Dhau, J. (2020). Energy storage in earth-abundant dolomite minerals. Applied Sciences, 10(19), Article 6679. https://doi.org/10.3390/APP10196679
  
  Vaganov, V., Kireev, A., Avdeev, S., Šahmenko, G., & Šinka, M. (2017). Prospects for effective use of dolomite in concrete compositions. Construction Science, 19(1), 27-32.
  
  Yang, L., Li, X., Pan, M., Fu, J., Wang, A., Kong, Y., & Ma, C. (2024). Light-weight high strength porous thermal insulation materials based on dolomite-granite waste. Ceramics International, 50, 55498–55507. https://doi.org/10.1016/j.ceramint.2024.10.410
  
  Yuliya, B., Ruslan, I., Evgenij, K., Ilgam, K., & Laysan, K. (2023). Low-temperature calcination composite binder from dolomite and its application to facing board materials. Case Studies in Construction Materials, 19, Article e02338. https://doi.org/10.1016/j.cscm.2023.e02338
  
  Zadehnajar, P., Mirmusavi, M. H., Bakhtiari, S. S. E., Bakhsheshi-Rad, H. R., Karbasi, S., Ramakrishna, S., & Berto, F. (2021). Recent advances on akermanite calcium-silicate ceramic for biomedical applications. International Journal of Applied Ceramic Technology, 18(6), 1901-1920. https://doi.org/10.1111/ijac.13814
  
  Zahir, N. A. M., Beg, M. A., & Kadir, A. A. (2020). Hydrothermal dolomitization on devonian to carboniferous carbonates in Kinta Valley, Perak, Malaysia: A petrographic study. Indonesian Journal on Geoscience, 7(1), 25–39. https://doi.org/10.17014/ijog.7.1.25-39
  
  Zhang, Y., Sun, Q., & Geng, J. (2017). Microstructural characterization of limestone exposed to heat with XRD, SEM and TG-DSC. Materials Characterization, 134, 285-295. https://doi.org/10.1016/j.matchar.2017.11.007