PERTANIKA JOURNAL OF TROPICAL AGRICULTURAL SCIENCE

J

• Ahaneku, I. E., Kamal, A. R., & Ogunjirin, O. A. (2013). Effects of heat treatment on the properties of mild steel using different quenchants. Frontiers in Science, 2(6), 153-158. https://doi.org/10.5923/j.fs.20120206.04.

• Alves, V. A., Brett, C. M. A., & Cavaleiro, A. (2013). Influence of heat treatment on the corrosion of high speed steel. Journal of Applied Electrochemistry, 31, 65-72. https://doi.org/10.1023/a:1004157623466

• Araoyinbo, A. O., Salleh, M. A. A. M., & Jusof, M. Z. (2018). Corrosion protection of mild steel in sea water using chemical inhibitor. In IOP Conference Series: Materials Science and Engineering (Vol. 343, No. 1, p. 012012). IOP Publishing. https://doi.org/10.1088/1757-899x/343/1/012012.

• Bhateja, A., Varma, A., Kashyap, A., & Singh, B. (2012). Study the effect on the hardness of the three sample grades of tool steel ie EN-31, EN-8 and D3 after heat treatment processes such as annealing, normalizing and hardening and tempering. The International Journal of Engineering and Science, 1(2), 253-259. http:// http://www.theijes.com/papers/v1-i2/AL01202530259

• Burstein, G. T., & Pistorius, P. C. (1995). Surface roughness and the metastable pitting of stainless steel in chloride solutions. Corrosion, 51(5), 380-385. https://doi.org/10.5006/1.3293603.

• Dauda, M., Kuburi, L. S., Obada, D. O., & Mustapha, R. I. (2015). Effects of various quenching media on mechanical properties of annealed 0.509wt%C - 0.178wt%Mn steel. Nigerian Journal of Technology, 34(3), 506-512. https://doi.org/10.4314/njt.v34i3.12

• Elewa, R. R., Araoyinbo, A. O., Fayomi, O. S. I., Samuel, A. U., & Biodun, M. B. (2021). Effect of machining on stainless steel: A review. In IOP Conference Series: Materials Science and Engineering (Vol. 1107, No. 1, p. 012084). IOP Publishing. https://doi.org/10.1088/1757-899x/1107/1/012084.

• Fadara, T. G., Akanbi, O. Y., & Fadare, D. A. (2011). Effect of heat treatment on mechanical properties and microstructure of NST 37-2 steel. Journal of Minerals and Materials Characterization and Engineering, 10(3), 299-308. https://doi.org/10.4236/jmmce.2011.103020.

• Hassan, M. F. (2016). Analysis of mechanical behavior and microstructural characteristics change of ASTM A-36 steel applying various heat treatment. Journal of Material Science & Engineering, 5(2), 1-6. https://doi.org/ 10.4172/2169-0022.1000227

• Ismail, N. M., Khatif, N. A. A., Kecik, M. A. K. A., & Shaharudin, M. A. H. (2016). The effect of heat treatment on the hardness and impact properties of medium carbon steel. In IOP Conference Series: Materials Science and Engineering (Vol. 114, No. 1, p. 012108). IOP Publishing. https://doi.org/10.1088/1757-899x/114/1/012108.

• Joseph, O. O., & Alo, F. I. (2014). An assessment of the microstructure and mechanical properties of 0.26% low carbon steel under different cooling media: Analysis by one-way anova. Industrial Engineering Letters, 4(7), 39-45.

• Kazeem, O. S., & Esther, T. A. (2018). Experiment on effect of heat treatment on mechanical and microstructure properties of AISI steel. Materials Today: Proceedings, 5, 17996-18001. https://doi.org/10.1016/j.matpr.2018.06.132.

• Marlon, M. N., Eduardo, M. S., Reny, A. R., & Tarcisio, G. B. (2018). Analysis of quenching parameters in AISI 4340 steel by using design of experiments. Materials Research, 4(1), 133-135. https://doi.org/10.1590/1980-5373-mr-2018-0315

• Melchers, R. E. (2005). The effect of corrosion on the structural reliability of steel offshore structures. Corrosion Science, 47(10), 2391-2410. https://doi.org/10.1016/j.corsci.2005.04.004

• Nkhoma, R. K. C, Siyasiya, C. W., & Stump, W. E. (2014). Hot workability of AISI 321 and AISI 304 austenitic stainless steels. Journal of Alloys and Compounds, 595, 103-112. https://doi.org/10.1016/j.jallcom.2014.01.157.

• Pillay, C., & Lin, J. (2014). The impact of additional nitrates in mild steel corrosion in a seawater / sediment system. Corrosion Science, 80, 416-426. https://doi.org/10.1016/j.corsci.2013.11.047.

• Roland, T. L., Cleophas, A. L., & Idehai, O. (2018). Effect of heat treatment processes on the localized corrosion resistance of austenitic stainless steel type 301 in chloride/sulphate solution. Results in Physics, 11, 570-576. https://doi.org/10.1016/j.rinp.2018.09.056

• Samuel, A. U., Araoyinbo, A. O., Elewa, R. R., & Biodun, M. B. (2021). Effect of machining of aluminium alloys with emphasis on aluminium 6061 alloy - A review. In IOP Conference Series: Materials Science and Engineering (Vol. 1107, No. 1, p. 012157). IOP Publishing. https://doi.org/10.1088/1757-899x/1107/1/012157.

• Seidu, S. O., & Kutelu, B. J. (2013). Effect of heat treatments on corrosion of welded low-carbon steel in acid and salt environments. Journal of Minerals and Materials Characterization and Engineering, 1(3), 95-100. https://doi.org/10.4236/jmmce.2013.13018

• Sharma, P., & Roy, H. (2014). Pitting corrosion failure of an AISI stainless steel pointer rod. Engineering Failure Analysis, 44, 400-407. ttps://doi.org/10.1016/j.engfailanal.2014.06.001

• Shi, D., Kang, K., & Gao, G. (2017). Effect of quenching parameters on the mechanical properties of the 7A04 aluminium alloy. Materials and Technology, 51(1), 95-99. https://doi.org/10.17222/mit.2015.267

• Tukur, S. A., Dambatta, M. S., Ahmed, A., & Muaz, N. M. (2014). Effect of heat treatment temperature on mechanical properties of the AISI 304 stainless steel. International Journal of Innovative Research in Science Engineering and Technology, 3, 9516-9520.

• Xiaohui, C., Jia, L., Xu, C., Huaming, W., & Zheng, H. (2018). Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing. Materials Science and Engineering: A, 715, 307-314. https://doi.org/10.1016/j.msea.2017.10.002.